Retro Replica Miniature Camera Case for DJI Nano Camera Photography no ams

Seeing the miniature camera used by Deputy Director Wu in "The Glory of Silence," I immediately thought of DJI Nano

I designed a photography case for the Nano

Version 2.2 updates the spring component and hanger hole, adding a bottom logo to prevent warping

1. Please use glue on the build plate for reinforcement!!! Emphasizing, this is very important. For quality considerations, I did not use brim, but this poses a risk of collapse! Be sure to apply glue to the build plate

2. If conditions permit, the spring component can be printed separately with PETG for better results. When assembling, just thread it through the shutter; no glue is needed

3. The lanyard hole is a negative, meaning you can choose the appropriate position yourself

4. Thank you for choosing to keep my logo

Version 2.1 is fully functional but has some flaws; if many people like it, I will arrange time to optimize this model

1. The shutter does not have a spring mechanism; currently, when inserting the camera, it's easier to put it in upside down, allowing the shutter component to avoid the camera

2. One part of the lens frame component prints transparently, but it does not affect usage

3. Currently, there is no ideal way to remove the camera; you need to push the lens to take it out. You can prepare a soft cloth to push the camera out

Printing:

Use silk+ parameters in the print profile; the material parameters are from Xiaohongshu@jamie, I like this print profile so I kept it

If you print with other materials, please adjust the print material first and regenerate the print gcode

Assembly:

All components except the shutter require glue for installation

The bottom has 4 preset magnet positions, referring to this Xiaohongshu link: 【Osmo Nano Magnetic Poles - Zhe Zhe | Xiaohongshu - Your Lifestyle Interest Community】  

When assembling, please insert the camera first, then apply glue into the 2 holes, then insert the magnets; the magnets will directly and correctly attract the magnetic poles through the component!

Actual tests show that 4 magnets are not needed; just 2 (6*2mm) can secure the camera

Commercial use is strictly prohibited

——————————————

Happy printing