CARD STORAGE BOX - Print in Place

This is a custom order I received to store the iconic Spanish playing cards.

Please note that the maximum card deck size must be 95x61x12 (height x width x depth); if these measurements are exceeded, the deck will not fit. If you need other measurements, feel free to write to me, and I will adapt the design for you.

First, insert the piece that goes into the bottom to push the cards. For the hinge, insert 1.75mm filament, cut to the required size, and apply a little glue to the ends.

If you want to see the assembly and operation, you can watch it in the reel I uploaded: https://www.instagram.com/reel/C1hSiCNqUWu/?igsh=MXVhdW5oZjA0NzRzdQ==

I hope you enjoy my design!

3D PRINTING PARAMETERS

Printer: Ender 3 S1 Pro

Layer height: 0.2mm

Infill: 10%

Supports: Not necessary