Christmas Frame 10x15 Vertical with Tree

Here I am to offer you my version of a Christmas photo frame, in this 10x15 Vertical with Tree version (other models available on my profile).

IMPORTANT: on the first plate, the objects will be printed PER OBJECT, so an AMS will not be needed. Also, from personal experience, the frame should be printed standing up (In the case of the A1, placed lengthwise to minimize its movement. In my case, I applied a bit of glue to the plate, using the classic Textured plate provided by Bambu Lab).

To fix the stand (only if you don't put it away after the holidays), it is suggested to put glue in the back cut of the frame, and for a better aesthetic effect, it is suggested to place the printed side in direct contact with the build plate facing upwards.