Desktop Floating Tablet Stand (Universal)

This is a minimalist floating tablet stand that can hide cables, has a hollow bottom, and allows you to add counterweights;

It supports most tablets, theoretically without size restrictions (10 inches and above are all compatible), but it may be affected by the camera's position. Please consider if it's suitable for you. I personally use an Oppo Pad 4 Pro (13 inches), and it works perfectly;

If you want magnetic adsorption, you can, like me, buy some self-adhesive iron sheets and stick them to the tablet support surface. The tablet's own magnets will provide some magnetic force (it seems that relying solely on iron sheets doesn't hold very tightly, so a tablet tray is needed);

After printing, you need to glue the tablet tray yourself. U-glue has been tested to work, and other glues like 502 should also be fine. You can choose a suitable glue based on your printing material;

There are two tablet support surface files: one with the support point slightly below the center of the support surface (actual effect as shown in the uploaded image), and the other with the support point exactly in the center of the support surface (actual use is closer to the desktop, about 1.8cm closer). Please read and choose for yourself;

The estimated total filament consumption is about 300g, and common filaments are suitable (I use R3D's white PETG filament);