Search models, users, collections, and posts
Mandolorian HueForge
IP Report
Print Profile(2)
5 Colors0.08mm layer, 2 walls, 100% infill
Designer
3.6 h
1 plate
4 Colors 0.08mm layer, 2 walls, 100% infill
Designer
5.2 h
1 plate
Open in Bambu Studio
Boost
54
126
12
2
74
16
Released
Description
4 Colors
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Graphite Gray Transmission Distance: 2.5
PLA Gray Transmission Distance: 3
PLA White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Gray
At layer #11 (0.96mm) swap to Gray
At layer #19 (1.6mm) swap White for the rest.
5 Colors
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Graphite Gray Transmission Distance: 2.5
PLA Gray Transmission Distance: 3
PLA Black Transmission Distance: 0.3
PLA Orange Transmission Distance: 5
PLA White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #8 (0.72mm) swap to Gray
At layer #15 (1.28mm) swap to Black
At layer #17 (1.44mm) swap to Orange
At layer #23 (1.92mm) swap to White for the rest.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)