Search models, users, collections, and posts
Bambu Lab Enclosure Two-Part Magnetic Door Handle
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
1.4 h
1 plate
Open in Bambu Studio
Boost
1
1
0
0
1
0
Released
Description
Content has been automatically translated.
A two-part magnetic door handle for the Bambu Lab A1 enclosure. Tested with strong closing force, it has a cushioning function. It requires 4 M5×8 countersunk bolts. Note that only 8mm long bolts can be used; longer ones will not fit. It also needs two aluminum profile T-nuts and four 8×3mm magnets. The left side is fixed on the acrylic plate, and tapping is required, though if the hole is drilled correctly, tapping may not be necessary.
Documentation (1)
Assembly Guide (1)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (0)