Print Profile(9)
Description
Membership
If you want to sell printed model, join my membership.
Made a little gun toy as a fidget spinner. Made with slide back barrel, flip up muzzle and spinning wheel.
Assembly:
Carefully remove all supports, than insert both clips in that half with opening for muzzle release button and insert button.
Put wheel in place and clip on other half of body, you can use a bit of superglue.
You will need one little rubber band, around 3cm in diameter and one purge line from your printer and cut off that angle on the end. Bend that purge line in middle and put it through rubber band.
Than attach rubber band to hook in barrel and put that purge line through little hole behind button.
Now attach barrel to the body and pull that rubber band through that hole.
Then attach rubber band to hook on muzzle and clip muzzle to the body.
And now you are done :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1964)