user_3300764456

cover

微信图片_20251103220024_36_72(1).png

微信图片_20251103220025_38_72(1).png

微信图片_20251103230938_40_72.jpg

微信图片_20251103230939_41_72.jpg

微信图片_20251103230940_42_72.jpg

微信图片_20251103230942_45_72.jpg

plate_1.png

2025-11-03_347f34177c7c7.png

0.24mm layer, 2 walls, 15% infill

<h2>家里原有龙猫喂水固定件固定不稳，被龙猫经常咬下来，才设计了这个加固件。</h2><h2>固定的水瓶的直径50毫米，过大过小都需要修改模式，或在打印前放大或缩小模型；</h2><h2>固定笼子孔是按宽23mm*高21mm的孔设计的，厚度3-5mm，固定块38mm*38mm，只要孔大于23*21，小于35*35，理论上都可以安装上；</h2>

<h2>The original chinchilla water feeder holder at home was unstable and often bitten off by the chinchilla, so I designed this reinforcement part.</h2><h2>The fixed water bottle has a diameter of 50mm; if it's too large or too small, you will need to modify the model or scale it up or down before printing.</h2><h2>The cage mounting hole is designed for a hole that is 23mm wide * 21mm high, with a thickness of 3-5mm. The fixing block is 38mm*38mm. As long as the cage hole is larger than 23*21mm and smaller than 35*35mm, it can theoretically be installed.</h2>

Pet Water Bottle Holder

ASIA

Print Profile(1)

Description

The original chinchilla water feeder holder at home was unstable and often bitten off by the chinchilla, so I designed this reinforcement part.

The fixed water bottle has a diameter of 50mm; if it's too large or too small, you will need to modify the model or scale it up or down before printing.

The cage mounting hole is designed for a hole that is 23mm wide * 21mm high, with a thickness of 3-5mm. The fixing block is 38mm38mm. As long as the cage hole is larger than 2321mm and smaller than 35*35mm, it can theoretically be installed.

Comment & Rating (1)

License

Related Models