Paddy’s-Style Bar Coaster Bundle

Overview

A bundle of bar themed coasters inspired by the vibe of It’s Always Sunny in Philadelphia. This is a fan made tribute for personal use in your home bar or game room. Each coaster has a clean silhouette with bold iconography and crisp edges for easy printing and a tidy finish.

Not affiliated with the show or its rights holders. This is fan art.

Print notes

• Size 103 mm diameter and 2.17 mm thick
• Layer height 0.20 mm
• Walls 3
• Infill 12 to 20 percent grid or gyroid
• Material PLA or PETG
• Bed adhesion none or small skirt
• Optional add a 0.6 to 1.0 mm negative emboss under the icon to help trap condensation
• For multi color map bodies in the 3MF or do a single filament swap at the first top color layer

Assembly and finishing

• Backing: 4 inch self adhesive cork circles. This matches the product you linked.
• Fit: The coasters are sized for these backers at default scale for a flush fit. Trimming is not required.
• Tuning if needed: If your printer runs slightly tight or loose adjust horizontal expansion by plus or minus 0.2 to 0.4 mm or scale between 99 and 101 percent
• Application: Clean the underside with isopropyl alcohol. Peel the liner. Align the cork edge to edge with the base. Press from the center outward to remove air. Burnish with a roller or a spoon for 30 to 60 seconds.
• Adhesion boost optional: The stock adhesive is usually enough. For heavy bar use apply a light mist of 3M 77 or a thin coat of contact cement and follow the cure time.

File list

• 3MF project file

Licensing and usage

Fan made tribute. No affiliation with any brand or rights holder.
Personal use permitted. Please check local guidelines for selling derivatives that reference third party IP.