K-Pop Warrior Bookmarks (bird and tiger)
Print Profile(6)
Description
Bookmarks featuring the head of Derpy and his accompanying bird, who appear in the K-Pop Warriors movie
They require AMS, with white, black, yellow, and blue colors
They have an approximate thickness of 1 mm in the part that goes into the book, and about 2 mm at the head, so it doesn't get lost between the pages
Regarding the tiger, which has more detail than the bird, I have included several downloadable models, with 0.4 and also 0.2 mm nozzles. As expected, if printed with the 0.2 mm nozzle, it will take much longer, about 3 hours in fact, but I personally recommend doing it, because the details of the teeth, whiskers, and eyes will be better appreciated. I personally did it with 0.4 because speed was prioritized for the project, as I had to print a large number of bookmarks to give as gifts for my daughter's birthday. The result is good, but I admit that if I had made only one for her, I would have printed it at 0.2 mm. The bird has no problem, the lines are simple
I also include the model in .obj extension, so you can slice it in other applications, if desired
The two bookmarks cannot be printed on a single plate, because although they share three colors, they differ in red/blue
In summary, there are print plates/profiles
- Tiger with 0.2 and 0.4 mm nozzles
- Bird with 0.4 mm nozzle
- All of them in both PETG and PLA
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)