Air Deflector for BambuLab P2s

A little coffee, a big smile! ☕ 

Click below and support my creativity.

Subscribe to my Telegram channel: support and assistance throughout the Bambu Lab world, with the opportunity to ask me any questions or requests.

Click on the symbol below

🌀 Air Deflector for P2S – Uniform Flow and Improved Adhesion

The P2S air deflector is designed to optimize the model's new adaptive airflow system, which uses a duct positioned on the right side.

Despite the excellent efficiency of the original system, the airflow remains concentrated in the center of the print bed, leaving the sides less ventilated. 

Furthermore, during the first layer printing, the bed plate partially covers the air outlet, reducing the local temperature and increasing the risk of warping and poor adhesion.

This deflector solves both problems:

🔄 Uniform airflow distribution across the entire bed surface.

🌡️ Reduced temperature variations during the first layer.

🧩 Easy to install, compatible with the original duct.

🧱 No permanent modifications to the printer.

Perfect for those looking for more consistent adhesion, improved surface quality, and reduced risk of warping during printing.

N.B.
I do not recommend printing in PLA.

If you love clever and creative 3D printing projects, if you love keeping everything organized, and above all, if you love printing...then you'll probably appreciate what I create every day!

Check out all my designs on MakerWorld, you can find them here:

🔗 https://makerworld.com/it/@Officine_Casper

I regularly upload practical and original projects, designed for everyday use or for all enthusiasts like me.
Download what you like and, if you feel like it, leave a like or a comment...any feedback is greatly appreciated and gives me the motivation to keep creating! 🙌

⚠️ Printing Problems ⚠️

I know how frustrating it can be to encounter difficulties during a 3D print, and I always appreciate constructive criticism or suggestions for improving my models. 🙏

However, I kindly ask you to always ensure your printer is properly calibrated, specifically:

⚙️ Correctly set extrusion flow

🧲 If you have adhesion issues, try using a brim or a gripper

💡 Important note: Any print failures are not due to the model or print profile.

All files are thoroughly tested before publication, and I always share the print profile I used for the published results.

Thank you so much for your understanding and…

✨ Happy printing, everyone! 🖨️