190mm Hueforge Interlock Frames; No Glue Required - Free 3D Print Model

Search models, users, collections, and posts

mikelb0013

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% infill, Cubic Infill, Normal Auto Supports

Designer

6.5 h

4 plates

4.7(6)

Minimal/Way Less Supports: .2 layer height, 10% infill, 3 walls

Designer

5.8 h

4 plates

5.0(1)

Open in Bambu Studio

Boost

133

193

178

Released

Description

Update Version 2 (3/4/24):

Added print profile V2 (190mmFramesV2MW profile) that requires WAY less supports (only needed for key overhangs on two frames, other frames need 0 supports.

Be sure that hueforge print dimensions* are set to 190 x 190 to fit this updated frame version otherwise V1 with deeper pockets will be needed.

*Do NOT change the dimensions of the Frames, they are set with specific tolerances and any adjustment large or small will effect how they slot together

If you like any of my models and feel like buying me a drink to continue my late hours of modeling, your generosity is always welcome!

Membership

If you are interested in a Commercial License to sell this print, be sure to join my membership!

Join

200mm Interlocking Frame can be found https://makerworld.com/en/models/217207#profileId-236230

180mm Interlocking Frame can be found https://makerworld.com/en/models/226156#profileId-243905

150mm (A1 Mini) Interlocking frame can be found https://makerworld.com/en/models/521019#profileId-437488

120mm Interlocking frame Patreon Exclusive

100mm (A1 Mini) Interlocking frame can be found https://makerworld.com/en/models/553996#profileId-472586

Original (2/24/24)

190mm Interlocking Frames for Ninja turtle Hueforge
Use supports

If you print the Top Right (Mikey 190) or Bottom Left (Donny 190) no key slots protrude out and can be used as single use.
Top Row picture slots come from the top down (Leo and Mikey). Bottom Row Slots come from the left (Donny) or right (Raph)
- Pictures can be taken out and replaced at all times, nothing is blocked
- Can hold up to 3mm Thick Lithos or hueforge

Hueforge links: If you happen to grab the 200x200 ones, you will need to trim off 5mm on each size. I apparently only grabbed the Michelangelo 200x200 the rest all seemed to be 190mm anyways. Even trimming isn't a big deal as its all black anyways.

teenage mutant ninja turtles