Adjustable & Portable Laptop Stand

Description

This laptop stand is created for a 17" laptop but it can adjust for a 15" and it can also be used as a drawing stand for any tablet.

The left and right sides of the supports have 2 hole for 10mm x 3mm neodymium magnets, this will help the stand to keep folded for easy travel , here's a link for the ones i used on this project.

https://www.amazon.com/THCMAG-Neodymium-Magnets-Whiteboard-12x3MM-50PCS/dp/B098WP6V4B/ref=sr_1_2_sspa?crid=32OPTK5LEPFV0&dib=eyJ2IjoiMSJ9.M-k30OnzyOPVn4BBJLjesjbkQLR4oAEau3y2CkbPecBeX7dc5ZhEqxvC2zRz_HNfLVEXrwZ61fxhl-ty7gR1SA.JX7QvC0avep7htiTWq70eJtnwKn0ERyi7lL1wMcfIts&dib_tag=se&keywords=10%2Bx%2B3%2Bmm%2Bneodymium%2Bmagnets&qid=1704944757&sprefix=10%2Bmm%2Bne%2Caps%2C634&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

Printing Instructions

• I recommend 15% infill.
• .25 layer height.
• The pins have enough tolerances to be slightly press fitted buy i recommend to use a little glue to the tip of the pin to prevent falling .
• Parts print Flat on the logo side

Part’s needed

• 2ea— linkage 1
• 2 ea— linkage 2
• 6 ea—pins
• 1 ea—right side
• 1 ea —left side
• 4 ea— neodymium magnets