Panda Branch Bigtree Tech A1 Case on Z-Axis

This case for the BIGTREETECH Panda Branch V1.0 has been specially remix'ed from the original model and improved with the addition of mounting tabs to be attached to the back of the Z-axis of the BAMBULAB A1 in the pre-drilled holes and with the help of 2 screws from the kit supplied with the printer. M3x10 screws can also be used. The case is thus well secured, unlike the original model whose upper fastening was missing.

Special feature: THE CONNECTIONS ARE ORIENTED TOWARDS THE REAR of the printer and not to the side, making them more practical in some cases. Moreover, in this orientation, the LEDs are more visible inside the printer and their reading is much easier at a glance (see photo).

The case cover is oriented on its edge on the build plate to facilitate support removal compared to the original model. Still, plan for a small pair of pliers to save time.

Can be printed in PLA or PETG with no observed issues.

Happy printing and thanks for your potential support.