Foldable Tripod (Multi-functional Extension)

Features:

• Simple and fast printing, low filament consumption
• no supports printing, Print in Place legs, very high structural strength
• Stepless adjustment of leg angle, high load-bearing capacity
• Expandable with various adapter buckles (mobile phones, cameras, GoPro, etc., more can be expanded in the future)
• The stand has two heights, already assigned according to function, and all parts are interchangeable

Printing and Assembly:

• The print profile is for separate printing, you only need to select the functional accessories you need, which include the matching stand, you do not need to print the stand separately
• If you need different leg lengths, you can print them from other accessories

Accessory 1: GoPro Stand

• You will need to prepare GoPro related accessories before printing
• The rotating shaft section has increased walls settings in the print settings
• The stand in this accessory is the low version

Accessory 2: Simple Phone Stand

• Fully 3D Printed part
• Clamping range 60-100mm
• Since the phone clamp part is relatively heavy, the stand in this accessory is the high version

Accessory 3: Phone Base

• Fully 3D Printed part
• Since the phone clamp part is relatively heavy, the stand in this accessory is the high version

Accessory 4: Camera Adapter Stand (1/4\"-20 screw adapter)

• You will need to prepare a camera adapter bolt before printing
• The connecting rod section has increased walls settings in the print settings
• The stand in this accessory is the low version

*Prepared bolt dimensions:

1. Use adapter bolts for cameras and other accessories
2. 1/4 inch-20UNS American standard hex head bolt, ANSI B18.2.1 standard, hex across flats dimension 11.11mm, nominal diameter 6.35mm, American coarse thread, pitch 1.27mm
3. Because there are many types of hex parts for hex head bolts, I have reserved a hexagonal hole with an across flats dimension of 11.2mm, if your bolt size has a slight error, you can modify it yourself or use filler + super glue

Accessory 5: Heavy-duty Phone Stand

• No hardware required
• Connectable in three directions
• Since the phone clamp part is relatively heavy, the stand in this accessory is the high version

Strength Test:

• Filament: PLA Basic (Green) + PLA Matte (White)
• Print strength: 2 walls, 15% infill (default setting)
• Opening angle: 40-45°
• Baseplate material: ordinary cardboard box
• Vertical load-bearing 26kg with no damage, no deformation, actual load-bearing capacity will be higher