Gaslands 16mm Skid Dice - Free 3D Print Model

Search models, users, collections, and posts

Once in a Six Side

Toys & Games>Board Games

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

light weight 0.2mm nozzle, 0.12mm layer, 4 walls, 15% infill

2.6 h

1 plate

4.9(19)

Medium Weight 0.08mm layer, 2 walls, 90% infill

2.3 h

1 plate

5.0(7)

Open in Bambu Studio

Boost

113

331

462

292

Released

Description

16mm skid dice for Gaslands and Gaslands Refueled.

Print Settings

Printer Brand:

Anycubic

Printer:

Photon

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.05

Infill:

100%

Filament:Resin Resin Grey

Notes:

I printed mine with Anycubic Grey resin with stock Photon Workshop print settings. Tried a few orientations and the best that worked for me was parallel to the build plate with a boat load of supports on just one side.

Post-Printing=============

Finished dice!

What I did

After removing the supports I sanded the surface as smooth as I was able, then primed in black. I then carefully applied a few coats of screaming skull to the faces of the dice, 3 sides at a time until I achieved full coverage. Haven't varnished yet but that'll be the next step, and so far I think they look great!

How I Designed This===================

Downloaded the free skid dice template from the Gaslands website and brought into Affinity Photo where I blocked in the designs (by default they have a splattered paint effect which isn't ideal) before converting to SVG and applying to a simple filleted 16mm cube in Fusion 360.

Please note the designs are not perfectly centered as Fusion 360 apparently lacks this ability? But in any case I tried my best to center them and I don't think any misalignment is noticeable at all.

Category: Dice