R36S Case with Accessory Compartment

Please consider giving me a BOOST to help me continue creating free files

R36S Case with Accessory Compartment

Update: 2026-03-12: Added print profiles for 6x2 magnets

This is my remix of an R36S case with an accessory compartment for USB cables and slots for USB Wi-Fi and USB OTG adapters. 

My thanks go to Cyberdyne for his great model and the permission for this remix, but also to the original creator and his model.

You have the choice between three different print profiles:

• Multi-color with AMS
• Multi-color without AMS (built-in pause)
• Single color

My biggest changes to the remix:

• Recess for better printed shoulder buttons (compatibility with original and 3D printed shoulder buttons)
• Recess for Power/Reset (to prevent accidental power-on)
• Everything on one print plate, no supports, only lid with drawn brim

Additionally required:

• 4 magnets (8×3 mm or 6x2 mm) 
• A piece of filament as a hinge pin (I used PLA) 

• Optionally a little superglue for the magnets

   

Feel free to upload adapted profiles, and I am always open to suggestions for improvement.

Feel free to also check out my other creations.