Bambu Lab A1 automatic material changing dual control toolhead and heatbed cable fixing hook
Print Profile(3)
Description
Installation video [Automatic plate changing front dual-wire control installation] https://www.bilibili.com/video/BV1WeimBwExd/?share_source=copy_web
Print in two plates If the hook on the first plate is too high, you can reprint the second plate with the hook lowered by 2mm in height
Updated magnet installation issue
Method one:
Requires 4 round 10x3mm magnets
3 M3x14 cup head screws
Updated torsion spring installation
Method two:
Unit mm
Can also use 1 torsion spring (stainless steel wire diameter 0.6/0.7/0.8 - inner diameter 5 - outer diameter 5.5 and 6 are acceptable - 5 turns - 180 degree angle)
1 M2.5x30 dowel pin
Do not overtighten the fixing screws, as this will strip the threads of the heated bed
Safety Notice
I am not responsible for any losses caused by installation or use
Happy printing everyone
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)