CriaBox3D

cover

929b9f85-a9a2-40dc-a783-2a16de09cd98.jpg

10ded9de-2c69-43f9-8d0c-5ab137820a7e.jpg

plate_1.png

2025-11-18_000028a4d0e2e.jpg

<p>A geometria foi desenvolvida para proporcionar <strong>flexibilidade controlada</strong>, evitando quebras prematuras mesmo em PLA.</p><h3><strong>Especificações do modelo</strong></h3><ul><li>Impressão em peça única</li><li>Paredes superiores reforçadas</li><li>Área central com alívio de tensão para permitir abertura uniforme</li><li>Pontas alinhadas para precisão na pega</li><li>Furo traseiro projetado para facilitar organização, chaveiro ou pendurar no painel</li></ul><h3><strong>Parâmetros recomendados de impressão</strong></h3><ul><li><strong>Material:</strong> PLA ou PETG</li><li><strong>Altura de camada:</strong> 0.20 mm</li><li><strong>Espessura de parede:</strong> 3 linhas (≈1.2 mm)</li><li><strong>Infill:</strong> 20% a 30% (Grid ou Gyroid)</li><li><strong>Suportes:</strong> Não requer</li><li><strong>Temperatura sugerida:</strong><ul><li>PLA: 205–215 °C</li><li>Mesa: 55–60 °C</li></ul></li><li><strong>Orientação:</strong> imprimir na posição original (deitada), garantindo rigidez e flexibilidade adequadas</li></ul><h3><strong>Comportamento do modelo</strong></h3><ul><li>A região das hastes foi dimensionada para permitir flexão moderada sem deformar permanentemente.</li><li>Para maior rigidez, recomenda-se usar PETG ou aumentar a espessura lateral.</li><li>Para maior flexibilidade, PLA é suficiente e imprime com excelente precisão.</li></ul><h3><strong>Dimensões</strong></h3><ul><li>Comprimento total: ~115 mm</li><li>Abertura máxima: 22–25 mm (dependendo do material e infill)</li><li>Espessura das hastes: 2.8–3.2 mm (varia conforme fluxo e slicer)</li></ul><h3><strong>Aplicações</strong></h3><ul><li>Remoção de suportes</li><li>Manipulação de peças pequenas</li><li>Eletrônica</li><li>Ateliê</li><li>Organização</li><li>Uso geral em bancada</li></ul><h2><strong>Tags técnicas</strong></h2><p>tweezers<br>pinça<br>tools<br>utility<br>benchtools<br>printinplace<br>supportfree<br>fdm<br>3dmodel<br>3dprinting<br>pla<br>petg<br>parametric<br>flexibletool<br>desktool<br>maker<br>engineering<br>precisiontool</p>

<p>The geometry was developed to provide <strong>controlled flexibility</strong>, preventing premature breakage even in PLA.</p><h3><strong>Model Specifications</strong></h3><ul><li>Single-piece print</li><li>Reinforced top walls</li><li>Central area with tension relief to allow uniform opening</li><li>Aligned tips for precise grip</li><li>Rear hole designed for easy organization, keychain, or hanging on a pegboard</li></ul><h3><strong>Recommended Printing Parameters</strong></h3><ul><li><strong>Material:</strong> PLA or PETG</li><li><strong>Layer height:</strong> 0.20 mm</li><li><strong>Wall thickness:</strong> 3 lines (≈1.2 mm)</li><li><strong>Infill:</strong> 20% to 30% (Grid or Gyroid)</li><li><strong>Supports:</strong> Not required</li><li><strong>Suggested temperature:</strong><ul><li>PLA: 205–215 °C</li><li>Bed: 55–60 °C</li></ul></li><li><strong>Orientation:</strong> print in the original position (flat), ensuring adequate rigidity and flexibility</li></ul><h3><strong>Model Behavior</strong></h3><ul><li>The stem region was dimensioned to allow moderate bending without permanent deformation.</li><li>For greater rigidity, it is recommended to use PETG or increase the side thickness.</li><li>For greater flexibility, PLA is sufficient and prints with excellent precision.</li></ul><h3><strong>Dimensions</strong></h3><ul><li>Total length: ~115 mm</li><li>Maximum opening: 22–25 mm (depending on material and infill)</li><li>Stem thickness: 2.8–3.2 mm (varies with flow and slicer)</li></ul><h3><strong>Applications</strong></h3><ul><li>Support removal</li><li>Small parts handling</li><li>Electronics</li><li>Workshop</li><li>Organization</li><li>General workbench use</li></ul><h2><strong>Technical Tags</strong></h2><p>tweezers<br>tweezers<br>tools<br>utility<br>benchtools<br>printinplace<br>supportfree<br>fdm<br>3dmodel<br>3dprinting<br>pla<br>petg<br>parametric<br>flexibletool<br>desktool<br>maker<br>engineering<br>precisiontool</p>

0.2mm layer, 1 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Print Profile(1)

Description

Model Specifications

Recommended Printing Parameters

Model Behavior

Dimensions

Applications

Technical Tags

Comment & Rating (0)

License

Related Models

Multi-purpose Tweezers