Umbrella holder for stroller
Print Profile(1)
Bill of Materials
Description
I have designed a practical 2-part holder here to attach an umbrella to the side of a stroller or similar. The holder clamps to tubes with a 30mm diameter without problems. If the frame is thinner or somewhat oval, I have designed practical 3mm and 5mm thickeners made of flexible TPU to adapt the clamping effect to different frame sizes. My test model is printed from normal PLA, for a permanently stable product I recommend using filament with CF or ABS / ASA. The screws should be printed with 0.12mm layer height so that they work well. The two thickeners are optional on the 2nd plate and you have to see what you need; in my case, I needed two 5mm thickeners on the lower holder and only one 3mm thickener at the top of the handle.
Boost Me (for free)
I appreciate every boost :) Thank you.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)