Sloth Bookmark Hueforge - Free 3D Print Model

Search models, users, collections, and posts

CraftHappy

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

H2D

H2C

H2S

P2S

H2D Pro

0.08mm layer, 2 walls, 100% infill

Designer

1.3 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 96.9x152.5mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mm

Filaments Used:
    #080a0d PLA PolyLite Black Transmission Distance: 0.3
    #4d3324 PLA BambuLab Matte Dark Chocolate Transmission Distance: 0.1
    #ae835b PLA BambuLab Matte Caramel Transmission Distance: 1.5
    #d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Dark Chocolate
    At layer #12 (1.04mm) swap to Caramel
    At layer #15 (1.28mm) swap to Latte Brown for the rest.

Comment & Rating (0)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.