The Craft Planet

cover

F4V26QCLNN6X6S3.webp

FK3CJHYLNN6X6RY.webp

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

plate_10.png

plate_11.png

plate_12.png

Screenshot 2025-12-07 205027.png

Screenshot 2025-12-07 205041.png

<h2><strong>Bambu Lab A1 – PLA Print Profile</strong></h2><h3><strong>Temperatures</strong></h3><ul><li><strong>Nozzle:</strong> 205–215°C</li><li><strong>Bed:</strong> 55°C</li><li><strong>Fan:</strong> 100% after layer 3</li><li><strong>Chamber:</strong> Open air (A1 has no heated chamber)</li></ul><h3><strong>Speeds</strong></h3><ul><li><strong>Walls:</strong> 150 mm/s</li><li><strong>Infill:</strong> 200 mm/s</li><li><strong>Top/Bottom:</strong> 120 mm/s</li><li><strong>First Layer:</strong> 30 mm/s</li><li><strong>Travel:</strong> 300 mm/s</li></ul><h3><strong>Retraction</strong></h3><ul><li><strong>Distance:</strong> 0.3–0.4 mm</li><li><strong>Speed:</strong> 30 mm/s</li></ul><h3><strong>Other Settings</strong></h3><ul><li><strong>Flow:</strong> 100%</li><li><strong>Layer Height:</strong> 0.16–0.20 mm</li><li><strong>Cooling:</strong> High (80–100%)</li><li><strong>Input Shaper:</strong> ON</li><li><strong>Pressure Advance:</strong> Bambu auto-calibration</li></ul><h2> <strong>Bambu Lab A1 – PETG Print Profile</strong></h2><h3><strong>Temperatures</strong></h3><ul><li><strong>Nozzle:</strong> 235–245°C</li><li><strong>Bed:</strong> 75–80°C</li><li><strong>Fan:</strong> 20–40%</li><li><strong>Chamber:</strong> Open (PETG doesn’t need enclosure)</li></ul><h3><strong>Speeds</strong></h3><ul><li><strong>Walls:</strong> 120 mm/s</li><li><strong>Infill:</strong> 160 mm/s</li><li><strong>Top/Bottom:</strong> 80 mm/s</li><li><strong>First Layer:</strong> 25 mm/s</li></ul><h3><strong>Retraction</strong></h3><ul><li><strong>Distance:</strong> 0.4 mm</li><li><strong>Speed:</strong> 25 mm/s<br><i>(Prevents stringing)</i></li></ul><h3><strong>Other Settings</strong></h3><ul><li><strong>Flow:</strong> 103–105% (PETG expands less)</li><li><strong>Layer Height:</strong> 0.20 mm</li><li><strong>Cooling:</strong> Low</li><li><strong>Adhesion:</strong> Glue stick recommended (PETG sticks too hard)</li></ul><h2> <strong>Bambu Lab A1 – ABS/ASA Print Profile</strong></h2><p><i>(Use enclosure or draft shield — ABS hates airflow)</i></p><h3><strong>Temperatures</strong></h3><ul><li><strong>Nozzle:</strong> 245–255°C</li><li><strong>Bed:</strong> 90–100°C</li><li><strong>Fan:</strong> OFF</li><li><strong>Chamber:</strong> Warm (no drafts)</li></ul><h3><strong>Speeds</strong></h3><ul><li><strong>Walls:</strong> 100 mm/s</li><li><strong>Infill:</strong> 150 mm/s</li><li><strong>Top/Bottom:</strong> 60–80 mm/s</li><li><strong>First Layer:</strong> 30 mm/s</li></ul><h3><strong>Retraction</strong></h3><ul><li><strong>Distance:</strong> 0.4 mm</li><li><strong>Speed:</strong> 30 mm/s</li></ul><h3><strong>Other Settings</strong></h3><ul><li><strong>Flow:</strong> 100–102%</li><li><strong>Cooling:</strong> 0–10%</li><li><strong>Warping Control:</strong><ul><li>Use <strong>brim</strong></li><li>Use <strong>glue</strong> or <strong>bed adhesive</strong></li></ul></li></ul>

0.2mm layer, 3 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Turn PET Bottles Into 3D Printer Filament

<p>There are four main elements to the recycler. Starting from the bottle side, we’ve got a cutter which cuts the bottle into an even-width continuous strip. Then we’ve got the hot-end which the strip is pulled through to partially melt and convert it into the size and shape for filament. Then there is the reel which pulls the filament through the system and stores it for printing, and lastly is the controller on the front which controls the hot end temperature and the reeler motor.</p><p>The device doesn&#39;t fully melt the PET strip, it just softens it enough to be folded over into a cylindrical shape that is the same diameter as common 3D printer filament. </p>

PETamentor

ASIA

Print Profile(1)

Description

Comment & Rating (14)

This remix is based on

License

Related Models