Rengoku Hueforge

You can check all of my other unique designs here!

My hueforge models are right here!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 101.17x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mm

    #080a0d PLA BambuLab Basic Black  Transmission Distance: 0.3
    #ff9016 PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Pumpkin Orange
    At layer #15 (1.28mm) swap to Jade White for the rest.