Search models, users, collections, and posts
Green Post 724 box, dual card, single layer
IP Report
Print Profile(4)
0.2mm layer, 2 walls, 15% infill
Designer
2.1 h
1 plate
0.2mm layer, 2 walls, 15% infill
Designer
1.6 h
1 plate
The base plate rotates 45 degrees, it may be suitable for Jia Li Chuang printing, please try it yourself
Designer
1.6 h
1 plate
Top cover rotates 45 degrees, perhaps suitable for 嘉立创 printing, please try it yourself
Designer
2 h
1 plate
Open in Bambu Studio
Boost
0
1
0
0
4
0
Released
Description
Content has been automatically translated.
Boost Me (for free)
The model is free, I spent days of my spare time creating it, please give a free boost, thank you
Before You Start:
- Can be printed with no supports; of course, you can also enable supports if you want. You can try putting it in JiaLiChuang for free printing. The length exceeds the limit, try arranging it yourself, maybe it will work.
- If you need multi-layer stacking, you can try **glue** or **double-sided tape**, which is a good option.
- Additionally, on the Xianyu platform, print on demand is available at the shop with the same name, **石石山支的小铺**
Installation Guide:
- The board is fixed to the base plate, requiring four M2.5 standoffs, with a height of 10mm and thread length less than 5 but greater than 2, both are fine
Copper standoffs can also be replaced with M2.5 screws
The base plate requires four M2 self-tapping screws, any length less than 10 is acceptable
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)