kaewon

cover

2024-02-24_hm3h7530fxpy.png

2024-02-24_1c3ffw8i1o21.png

2024-02-24_tbqm0qqcqfvu.png

2024-02-24_fu33cze78vgw.png

2024-02-24_903sv39xbvhh.png

2024-02-24_eiuofqe9rjp0.png

plate_1.png

reinbrech.robert

PXL_20241121_083138406.jpg

Print Details:<ul><li>0.2mm layer</li><li>4 walls</li><li>30% infill</li></ul>Print this print-profil if you want the speedloader in a single color. Printing without AMS possible.

Standard Speedloader - No AMS

PXL_20241121_083148952.jpg

Print Details:<ul><li>0.2mm layer</li><li>4 walls</li><li>30% infill</li></ul>Print this print-profil is optimized for multicolor printing with the AMS. Works great with PLA.

Standard Speedloader - with AMS

PXL_20241121_102421690.jpg

Print Details:<ul><li>0.2mm layer</li><li>4 walls</li><li>30% infill</li></ul>Print this print-profil if you want the speedloader in a single color. Printing without AMS possible. This version has the knurled knob and the standard body.

Knurled Nob Speeadloader - No AMS

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

PXL_20241121_102300299.jpg

Print Details:<ul><li>0.2mm layer</li><li>4 walls</li><li>30% infill</li></ul>Print this print-profil has all parts on a single build plate. So you can decide the color of the parts without AMS and also mix your wanted design. Happy printing :)

Speedloader Parts - No AMS

Dan Wesson speed loader

Speed Loader (6 Round) .38 Special / .357 Magnum 

<div><h1>Summary</h1><div>.44 Magnum version of sthone's speed loader. I've also included alternate body shapes and knurled lock. Knurling I sourced from Saniainen's design. Tolerances are not as tight as the original but it works. The screw hole has not changed but I used M3x12 coarse thread screw which works fine.</div></div>

Speedloader .44 Magnum

ASIA

Print Profile(4)

Description

Summary

Comment & Rating (2)

This remix is based on

License

Related Models