Print Profile(1)
Description
Layer height of 0.08mm with 100% infill, first layer height of 0.16mm. It is recommended to change the wall generator to Arachne and modify the minimum wall line width to 55%
Model size is 150x112.85mm
You can print at higher layer heights below a base thickness of 0.48mm
Maximum allowable thickness 2.24mm and actual thickness 1.52mm
The filaments I used are
#000000 PLA Bambu Lab Basic Black Translucency Value TD: 0.6
#6f727e PLA PolyTerra Fossil Grey Translucency Value TD: 0.3
#ffffff PLA Bambu Lab Basic Jade White Translucency Value TD: 5
Filament change instructions without AMS:
Start with Black
Change to Fossil Grey at layer #7 (0.64mm)
Change to Jade White at layer #10 (0.88mm) until the end.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)