Print in Place Screwdriver Bit Box (for various specifications)
Print Profile(1)
Description
Print in Place no supports no assembly no hardware built-in snap closure smooth opening and closing
Boost Me (for free)
If you are satisfied with the print, I hope to receive your free boost
1. Dimensions: ① Overall dimensions 160*75*29.2mm
② Can store 45 screwdriver bits measuring 6.35mm*25mm
③ The front features a 28.5*153mm compartment, capable of storing extended bits under 150mm, as well as most bit handles, meeting various needs
2. The box body is 20.6mm high, the lid is 11.6mm high, the box body is taller than the lid, forming the final shape of the box
3. Uses 3 walls, tested to withstand drops from 1.5m without damaging the hinge
4. Supports A1 mini; supports PLA PETG printing
5. Note: ① Please dry the filament and thoroughly clean the build plate before printing to prevent warping
② After printing, wait for the model to cool down before removing it to prevent deformation, otherwise it will affect the smoothness of opening and closing, and the gap when the lid is in place
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)