【Hueforge】Breaking Bad Art Poster
Print Profile(1)
Description
Layer height of 0.08mm with 100% infill, first layer height of 0.16mm. It is recommended to change the wall generator to Arachne and modify the minimum wall line width to 55%
Model size is 133.33x200mm
You can print at a higher layer height below the base thickness of 0.48mm
Maximum allowed thickness 2.24mm and actual thickness 1.68mm
The filament I used is:
#000000 PLA BambuLab Basic Black Translucency TD: 0.6
#519f61 PLA PolyTerra Forest Green Translucency TD: 0.5
#f0be02 PLA PolyTerra Savannah Yellow Translucency TD: 3.5
#e2dedb PLA PolyLite White Translucency TD: 5
Filament change instructions:
Start with Black
Change to Forest Green at layer #8 (0.72mm)
Change to Savannah Yellow at layer #11 (0.96mm)
Change to White at layer #16 (1.36mm) until the end.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)