G-Shock PIP Watch Strap for Mudman G9000

I've had this watch for almost 15 years now and its still going strong. However, the resin strap (default watch strap) has given up. The G Shock Mudman G9000 requires an adapter to use generic watch straps, or an original must be purchased. Since I was hoping to print an adapter anyways, I decided to continue and make a flexible watch strap with magnets for locking. This is my 16th adapter (final one I promise) and 3rd watch strap version. 

The hinges are conical to allow perfect layers and tolerance. I ensure a smooth movement, flex the watch strap in all directions to its limit (ideally rapidly). This should dislodge/ grind away any burrs and bits that may cause a problem. 

Counter-sunk holes in the adapter allow for the mounting screws to be flush with the strap. 

Magnets used: Neodymium 5x3x2mm (8 of them) and fixed in place using two part epoxy resin post print.