Xbox Ally X BAXY Buttons

Hi!

Here are some custom 3D Printed Models of the BAXY Buttons on the Xbox Ally X and Xbox Ally.

I've included two height preferences and two printing types.

Resin File

The Resin File should work as is in Resin Printers.

Non-Resin File

The other file will work best when printing in PLA, PETG, or anything similar.  Just print the file with your default settings and that should work fine. Printed underneath 3 of the buttons (A X Y ), you will find a nub. Each nub is specifically created for one button. Do not mix and match them. 

From left to right, the button order is B A X Y.

B requires no nub. 

A X Y require a nub. Super glue the nub under the A button to A. The nub under X to X, and the nub under Y to Y. Again, do not and match as each one is a specific nub to reach the Dpad membrane.

Difference in Buttons Heights?

The original height of each Xbox Ally X button is about 8.5mm, so I've made the Regular Height buttons be 8.5mm not including the nub. The taller buttons are around 10-11mm in height. I like taller buttons so those are the ones I personally use, but feel free to try either.

If you have any questions, feel free to reach out! Thanks for looking and I hope you enjoy!