SantaScreenprinted 4 colours

I hope you like my models so much that you also give them a boost

I've figured out how to make simple screen print stencils and create multi-color prints, print one layer of 0.15mm from the first plate, pause before layer 2, place a fabric and stretch it and fasten it with (low) magnets (See image) I have tested with a fabric from IKEA Sarita, unfortunately it has been discontinued, but I have also tested with thin curtain fabric bought at a flea market. Then continue printing the stencil completely. When creating the image on fabric, follow the paint manufacturer's instructions, and feel free to also check screen print videos on Youtube so you feel reasonably confident in what you are doing. Place a stencil on the fabric to be printed, spread out paint, and pull it out with a squeegee, remove the stencil and let it dry for a while, then fit the next frame and do the same, if you're lucky, you will eventually have managed to make a gnome in several colors. Good luck