Giant Christmas Candy Cane
Print Profile(2)
Bill of Materials
- 8 x 450mm Carbon Fiber Rod x 1:
Description
Authentic Prototype v1.1 Design
The Giant Candy Cane model is a fun way to print one of the most iconic Christmas candies.
To ensure that every user can print the model, there is the option to use the AMS or do the swapping manually by pausing the print and swapping the colour (the print profile labeled NON-AMS already has the pauses)
Glue/Silicone Support Option:
Use Silicone or Superglue adhesive to attach the part together; this is the most economical option.
Carbon Fiber Rod Support Option:
While still tested with limited success, the model contains an approximately (varies depending on PLA expansion at the printing angle) 7.75mm shaft through the middle, which can be used to lock in the parts without using glue. The rod dimensions required are 7.5 x 500mm, and can be bought from any online retailer (I used Aliexpress).
Boost Me (for free)
This was the biggest model I have ever designed and printed. Please support me with a boost :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)