Zenitsu Agatsuma - Demon Slayer (Kimetsu no Yaiba) - Free 3D Print Model

Search models, users, collections, and posts

Scara

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(3)

All

H2C

X1 Carbon

P2S

H2D Pro

H2S

P1P

X1E

P1S

H2D

X2D

A2L

AMS, 0.2mm nozzle, 0.08mm layer, 4 walls, 100% infill

Designer

8.3 h

1 plate

AMS, 0.4mm nozzle, 0.08mm layer, 2 walls, 100% infill

Designer

3.7 h

1 plate

NO AMS, 0.4mm nozzle, 0.08mm layer, 2 walls, 100% infill

Designer

3.6 h

1 plate

Open in Bambu Studio

Boost

Released

Bill of Materials

Bambu Filaments

Select all

Description

A nice Hueforge print of Zenitsu from Demon Slayer (Kimetsu no Yaiba) ready to unsheath printed in 4 colors.

I personally printed it with a 0.2mm nozzle on my A1. I would actually recommand using a red filament with higher transmission distance for a darker result that would probably look better, but it's the only one I had.

Enjoy !

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.29mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.32mm

    #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
    #ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5
    #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #15 (1.28mm) swap to Yellow
    At layer #25 (2.08mm) swap to White for the rest.