Matigon

cover

adapter_a82b4308-6697-480d-a6d1-63e4b26b68c3.png

plate_1.png

2024-09-03_eb5e956dd84f5

V1 0.2mm layer, 2 walls, 15% infill 

2024-09-03_3115aceb1d3b5

V2 0.2mm layer, 2 walls, 15% infill 

Same as v2, but with higher tolerances for a snug fit and prevent a floppy cam

V2 updated 0.2mm layer, 6 walls, 25% infill

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like the model, boosting would be greatly appreciated</boostcontent></boostme>14mm to 19mm adapter for FPV cameras, works for any standard Nano fpv camera. No need for any sort of supports or a brim. Tested on my runcam split 3 nano, had some crashes and shows no signs of wear.  Included v2: Is a little beefier than v1, although heavier. (Same Dimensions)&nbsp;Update: Updated v2 model in order to have higher tolerances for a snug fit and prevent a floppy cam&nbsp;Recommendation: For the best performance and durability, it is recommended to print this adapter using TPU since it withstands crashes like a breeze.

FPV cam adapter Nano to Micro  (14mm to 19mm)

ASIA

Print Profile(3)

Bill of Materials

Description

Comment & Rating (9)

License

Related Models