J35A 64mm Ducted Fan RC Fixed-Wing Model

Wingspan 74cm, length 106cm

20251203: Added print profile, adjusted printing plate, compatible with P1, X1 and other models

Materials:

ABS/ASA 0.875 flow rate empty weight 820g

Carbon tubes:

1 carbon tube with outer diameter 4mm, length 40cm (fuselage-wing connection)

2 carbon tubes with outer diameter 4mm, length 30cm (fuselage-wing connection)

Suggested reinforcement:

2 carbon tubes with outer diameter 4mm, length 20cm (fuselage-vertical stabilizer connection)

2 carbon tubes with outer diameter 4mm, length 15cm (fuselage connection-horizontal stabilizer)

Optional reinforcement:

2 carbon tubes with outer diameter 4mm, length 30cm (fuselage connection-battery)

1 carbon tube with outer diameter 8mm, length 50cm (fuselage-wing connection)

Hardware:

4 M3*30mm screws (for securing the ducted fan)

4-8 magnets with 10mm diameter, 2mm thickness (cockpit, equipment bay cover)

2 steel shafts (pins) with outer diameter 4mm, length 8-12cm (horizontal stabilizer)

4 MR74ZZ bearings (horizontal stabilizer)

Electronics suggestions:

Use Baofeng or FMS 64 ducted fan, suggested thrust no less than 1.5kg on a thrust stand

【Big Baofeng 64 Ducted Fan Thrust Test-Bilibili】 https://b23.tv/PfbAu0D

【FMS64 Ducted Fan Different Voltage Test-Bilibili】 https://b23.tv/intrFl1

4-6 9g servos

Suggested center of gravity is at the marked location under the wing

This aircraft will no longer be updated, have fun

【3D Printed RC Aircraft Model Single 64 Hand Launch J-35A-Bilibili】 https://b23.tv/dtWm9hZ

【3D Printed J-35A 64 Ducted Fan-Bilibili】 https://b23.tv/WZTBWqr