Door Stopper, Wall and Floor Mount / Door Stopper

This small, practical door stopper was developed for use with TPU as part of a home renovation. It is ideally suited for use as a door stopper on both walls and floors. The stopper measures approximately 22x22x12 mm and can be easily screwed in with a recessed hole in the center. Alternatively, adhesive can be used on the bottom.

The door stopper is printed with 0% infill and two walls and requires no supports. Printed with soft TPU, the model provides gentle but effective cushioning. It is easy to print, provided TPU can be processed without issues. For the large variant on the floor, I changed the scaling in the slicer to 40x40x25 mm.

This stopper can also be used in a four-pack as speaker feet or for decoupling heavier objects.

___________________________________________

This small, practical door stopper was designed for use with TPU as part of a home renovation project. It's perfect for use as a door stopper on both walls and floors. The stopper has dimensions of approximately 22x22x12 mm and features a recessed hole in the center for easy screwing in. Alternatively, you can use adhesive on the bottom.

Printed with 0% infill and two walls, this model requires no supports and is made from soft TPU, which provides a gentle but effective cushioning. It's easy to print, as long as TPU can be processed without issues. For the larger version on the ground, I changed the scaling in the slicer to 40x40x25 mm.

This stopper can also be used in a four-pack as speaker feet or for decoupling heavier objects.