The Ultimate Multiclean For Rice, Fruits & Veggies
Print Profile(2)
Description
Boost Me (for free)
The Ultimate Multi-Purpose Rinser - For Rice, Fruits & Veggies! đđ
Tired of chasing runaway grains of rice or losing berries down the drain? Say goodbye to kitchen chaos with this innovative and highly practical rinser! Designed for efficiency and ease, this tool is a must-have for every home chef.
Why You'll Love It:
⢠đ Perfect for Rice: Its unique design creates a gentle swirling motion that thoroughly washes your rice, removing excess starch and impurities, ensuring perfectly fluffy rice every time.
⢠đ Fruit & Veggie Friendly: With its generous size and high walls, it's also ideal for washing a variety of fruits and vegetables. From delicate berries to larger produce, everything stays contained and gets a proper rinse.
⢠High Walls for High Volume: The extra-tall walls are specifically engineered to prevent splash-outs and keep all your ingredients securely inside, even when using plenty of water for a thorough wash.
⢠Efficient Water Use: The clever design promotes water circulation, making your rinsing process more effective and efficient.
⢠Durable & Food-Safe: Recommended to be printed in PETG, known for its food-safe properties, strength, and resistance to water and chemicals.
Upgrade your kitchen arsenal today! This rinser isn't just a gadget; it's a game-changer for clean, perfectly prepped ingredients.
Recommended Printing Parameters (PETG):
⢠Nozzle Diameter: 0.4mm
⢠Layer Height: 0.2mm (or 0.15mm for finer detail)
⢠Infill: 15-20% (Gyroid or Cubic recommended for strength)
⢠Perimeters/Wall Loops: 3-4
⢠Top/Bottom Layers: 4-5
⢠Print Speed: 50-60 mm/s (adjust based on your printer's performance for PETG)
⢠Nozzle Temperature: 230-245°C (refer to your filament manufacturer's recommendations)
⢠Bed Temperature: 70-85°C (with an adhesive like glue stick or hairspray for better adhesion)
⢠Cooling Fan: 20-50% (PETG benefits from less cooling than PLA to improve layer adhesion)
⢠Supports: Not typically required for this design, but if printing on an FDM printer with significant overhangs, consider minimal tree supports from the build plate.
⢠Raft/Brim: A brim (5-10mm) is recommended for better bed adhesion, especially with larger prints in PETG.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (44)