@theoldman

cover

20251204_165137.jpg

stihl hanger.png

stihl hanger section.png

Kombi Attachment Hanger v3

plate_1.png

2025-12-05_ab2a5b4175898.jpg

<p>I added a surface angled at 45 degrees on the bottom of the hanger to allow it to be printed at 45 degrees in an attempt to make it stronger. Supports are painted on one side to help stabilise it during the printing process. I used ASA CF because it was available to experiment with, but ASA or PETG would work well too. Make sure you dry your filament and ensure the build plate is clean - I had one print fail due to adhesion issues.</p>

0.2mm layer, 4 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>This attachment allows the attachments for the STIHL Kombi motor to be hung up. The hanger is slipped onto the end of the attachment and rotated slightly to allow it to settle into place. </p>

STIHL Kombi Attachment Hanger

ASIA

Print Profile(1)

Description

Comment & Rating (27)

License

Related Models