Cover for iPhone 14 PRO - logo / NO logo
Print Profile(2)
Description
Boost Me (for free)
A small download for you, a big help for me! Every download and, if possible, the Boost, allows me to earn the necessary points to publish and share new useful projects for the entire community. Thank you very much for your support!
>>>> COMPATIBLE ONLY WITH IPHONE 14 PRO (the style resembles that of the iPhone 17 but it is NOT compatible) <<<<
READ AT LEAST THE RED PARTS BELOW
Give your smartphone a futuristic touch with this exclusive case. This model not only protects your device but also transforms its aesthetics, anticipating the design lines imagined for the future **iPhone 17**.
⚠️ Compatibility
Designed with precise tolerances **exclusively for iPhone 14 Pro**. Not compatible with iPhone 14 standard, Plus, or Pro Max.
Also compatible with my project: **Camera Protection - iPhone 14 PRO**
https://makerworld.com/en/models/1515015-camera-protection-iphone-14-pro#profileId-1587022
✨ The Design
The concept originated from a dual need: **reliable protection** and **unique style**. Tired of ordinary cases, I wanted to create something that would protect my device (personally tested daily) while also offering a "visual upgrade". The lines, camera layout, and overall appearance recall the most popular renders and concepts of what the iPhone 17's design could be.
This design also aims to solve the problem of the camera module not allowing stable placement on smooth surfaces of the device: in this way, the issue is resolved by bringing the entire top part of the phone to the same level and protecting the camera lenses.
Key Features:
- Perfect Fit: Fits snugly on the iPhone 14 Pro's body without obstructing buttons or the charging port.
- Futuristic Look: A clean and modern design that captures attention.
- Tested Protection: Developed and used on my personal phone to ensure durability in daily use.
🖨️ Printing Instructions (Recommended)
For the best result, I recommend using the uploaded print profile. Choose between the two available, with or without a logo.
>>> REMOVE SUPPORTS <<<
remove the object from the build plate with supports attached
With the scraper, make sure to detach the support part from the case starting from the side openings
- It is important to insert the blade exactly between the thin support layer and the case itself
Calmly remove all remaining supports
Be careful when removing the kind of grid that forms above the tree supports
Perform the removal operation on ALL edges of the case multiple times, ensuring that any type of protrusion, even the smallest, is removed, as it would completely compromise the installation of the case on the device and make the print seem incorrect, even though it has been tested multiple times and fits perfectly.
Creator's Note: This project was born as a modeling exercise to combine the useful with the enjoyable: protecting my phone with an accessory not found in stores.
Do you like this model? If you download and print this case, please leave a **like**, a **comment**, or, even better, upload a **photo of your make**! Community feedback is essential for improving future designs.
Happy printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)