Oral B IO stand / charging station / Series 7-9

Search models, users, collections, and posts

TT-Products

Household>Other House Models

IP Report

Print Profile(2)

All

P1S

H2S

P1P

X1E

H2D

X1 Carbon

H2C

A1 mini

H2D Pro

P2S

X2D

A2L

V1 --- IO Stand --- PLA --- recommended settings

Designer

10.6 h

3 plates

4.9(8)

V1 --- IO Stand --- PETG HF --- recommended settings

Designer

10.8 h

3 plates

5.0(6)

Open in Bambu Studio

Boost

246

213

157

Released

Bill of Materials

List other parts

O-Ring. SD=3,5mm / ID=31,5mm / OD= 38,5mm x 3: for O-Ring Model. An O-ring with an outer diameter of 38mm might also fit. A thickness of 3.5mm is important.

Description

Keep your Oral-B IO toothbrushes and brush heads safe and secure! This station is designed for one to two people.

This charging station allows you to safely charge your Oral-B IO Series 7-9 toothbrushes on the charging base or store up to two toothbrushes in the adjacent tray without charging them. The underside of both trays features an optional area for attaching a 5 mm magnet, allowing the toothbrushes to be held magnetically, just like on the charging base.

The ring on top securely holds the toothbrush in place and prevents it from tipping over. You can choose between three models (with or without O-rings or with End cap only → no holder on top). The O-ring on top protects the toothbrush from scratches and, thanks to its rubber coating, feels comfortable when inserting and removing it. If you do not need the top ring, simply print the third print plate (End Cap without holder).

In addition to the two trays, each user has the option of attaching two brush heads to the tray (a total of four brush heads).

For cable management, there's a hidden channel on the back, or you can route the cable out the back, as with the Series 10 and its IO Sense. -> Please test with a Series 10. I only have a Series 9 without IO Sense. It should most likely fit, though. I'd be very grateful for any feedback!

----------------------------

Assembly:

The set is printed in two parts (body and top with O-ring / top without O-ring) and then simply needs to be pressed together using the model's snap-fit system. If it's loose (depending on the material), a little superglue can be applied to the stud holes.

For the model with O-rings, simply insert the three O-rings into the recess on the upper ring. No glue or other materials are needed! Each ring takes only a few seconds to install.

----------------------------

Model variants:

O-ring model:
For the O-ring model, three O-rings with a thickness (SD) of 3.5 mm and an inner diameter (ID) of 31.5 mm / outer diameter (OD) of 38.5 mm are required.

Standard model without O-ring:
Nothing is needed except the printed models.

----------------------------

Printing recommendation:
It is recommended to print the models in PLA or, even better, PETG.

Use the designer's print profiles to ensure the best fit.

----------------------------

Changelog and latest versions:

Changes:

07.12.2025: Release → Model: Oral B IO End Cap (without holder) V1.0
06.12.2025: Release → Oral B IO charging station V1.0

latest versions:

Version 1:

IO Stand body V1.0
IO Stand top with O-Ring V1.0
IO Stand without O-Ring V1.0
Oral B IO End Cap without holder V1.0

----------------------------

share your experiences with these models with me! Thank you, keep your filament dry and happy printing!

Comment & Rating (20)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.