Filament Swatch + Matching Storage Box
Print Profile(1)
Description
Boost Me (for free)
The future belongs to those who believe in the beauty of their dreams
用极低的材料留下你用过的耗材，上面贴标签的尺寸是30mm x 20mm
每个收纳盒前面部分留下一个小孔位可以打印你的耗材品类（pla、petg…)便于你快速挑选耗材，使用的磁铁是5mm x 1mm
收纳盒左右两侧的磁铁是6mm x 2mm，我给大家模型里留带磁铁孔的，和一侧带磁铁孔的，方便大家组合
上面的部分依次高度是0.8mm,0.6mm,0.4mm,0.2mm，方便你查看耗材情况
Use very low material to leave your used consumables, the size of the label on the top is 30mm x 20mm.
Leave a small hole in the front part of each organizer to print your consumables (pla, petg...) so you can quickly select the consumables, the magnet used is 5mm x 1mm.
The magnets on the left and right sides of the organizer are 6mm x 2mm, I'll leave you a model with magnet holes and one with magnet holes on one side to make it easier for you to combine them.
The height of the upper part is 0.8mm, 0.6mm, 0.4mm, 0.2mm, which is convenient for you to check the situation of the consumables.
同时我还设计了另一款带盖子的收纳盒版本，以及色卡mini版本，大家可以根据自己的喜好进我主页进行挑选：
I've also designed another version of the organizer with a lid, as well as a swatch mini version, so you can go to my homepage and pick it up according to your preference:
License
Comment & Rating (0)