HueForge - Pulp Fiction
Print Profile(1)
Description
Hueforge of Pulp Fiction poster, 200x133
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.2x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 8.8
PLA+ Sunlu Pure Yellow Transmission Distance: 9.6
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #17 (1.44mm) swap to Pure Yellow for the rest.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)