Print Profile(1)
Description
English:
Dummy surveillance camera for assembly.
The dimensions are approximately 180 mm in length and 100 mm in diameter.
I attached the bolts, joints, and lens using superglue.
The fake camera is mounted with 3 screws, for which three 7 mm holes are provided.
The lens can either be printed in a single color or, for a more realistic look, in multiple colors. (With the AMS 2 Pro, I used PLA Sparkle Red for the curved part of the lens.)
Printing time is about 5 hours 42 minutes, and it requires 108 g of filament.
I printed my model using Bambu Lab’s Matte Black PLA on my P1S, and the surfaces and holes turned out very well.
PETG (or other materials) can also be used if the dummy is frequently exposed to harsh weather conditions, although I have not tested this myself yet!
German:
Dummy surveillance camera for assembly.
Dimensions are approximately 180mm in length and 100mm in diameter.
I attached the bolts, joints, and lens using superglue.
The fake camera is mounted with 3 screws, for which three 7mm holes are provided.
The lens can either be printed in one color or, for a more realistic look, in multiple colors. (With the AMS 2 Pro, I used PLA Sparkle Red for the curvature of the lens).
Printing time is about 5h42min and it requires 108g of filament.
I printed my model using Bambu Lab’s Matte Black PLA on my P1S, and the surfaces and holes turned out very well.
PETG (or other materials) can also be used if the dummy is frequently exposed to harsh weather conditions, although I have not tested this myself yet!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)