Helical Orbit Gear Fidget Spinner - Simple Snap

Note: Rev2 Print Profile has just been uploaded. There have been 2 additional retainer parts that are included. These parts fit tight in the center sleeve and hold the gear retainer still while allowing the gears to rotate in respect to each other. In this way you can use the fidget in any way you like. Either you add the plastic retainers or keep it simple as the original file.

Assembly Instructions: You need to first snap the small gear in the internal retainer part. After that, you snap the whole assembly inside the larger gear. The retainer flexibility is enough to let it flex and fit into place inside the larger gear. If you need the extra action, you then put the 2 identical external retainers, so that you can limit the movement of the internal retainer ring and spin the gears in respect to each other. It depends what you like most :)

A clean and satisfying helical fidget spinner made from three simple printed parts: the outer ring, inner ring, and a special snap-fit retainer that locks everything together. No tools, screws, or bearings required—just print, snap, and spin.

Features

• Smooth dual-ring rotation
• Snap-fit retainer holds the mechanism securely
• No supports needed
• Helical grooves for grip and visual motion

If you enjoy the model, please leave a like and boost — it really helps!