5x5 rubiks cube
Print Profile(0)
Description
this is a 5x5x5 Rubik's cube I designed.
it is relatively easy to print as you can print it all in the same color and add stickers on afterwards.
to assemble, you must screw 5 M3 16mm bolts into the center then place the pieces in around these pieces and screw in the final M3 bolt after all pieces are in place
to print:
use supports but try to avoid large overhangs as it needs to be precise shapes
any infill percentage and type works, I used 10% and grid
I printed the center piece on 3 corners with no supports as this gave it the most strength and meant i didn't have to remove supports from inside the holes
if you enjoyed please:
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)