Buffalo Bills Spinning Christmas Ornaments

Hey-ayyyyyyy-ayyyyyyyy-ayy! Here are some spinning Christmas ornaments that will make any Bills fan want to SHOUT!  They all spin with colored rings and Bills themed designs. 

Here are the solid versions of these ornaments. 

Print requirements / settings: 

These are print in place, no supports or assembly required. Requires an AMS. Use the per-object settings in Studio and/or painting to change colors as you'd like.

Important setting change for printing a full bed of ornaments:  Make sure you go into the filament profile settings, Cooling Tab, and set the Auxillary Part Cooling to 0%. MW won't let me upload custom filament profiles. Otherwise, if the part is too close to the auxillary cooling fan it will ripple and distort the top surface from cooling too fast. At least it did on my P1S. 

Currently 4 different versions, all approximately 102mm in outer diameter. The logo is flush with the face of the ornament on both sides (no depth to the logo). 

1. Bills logo on both sides
2. MVP Speech Text & Logo on one side
3. MVP Speech Text & logo on one side. JA17 Logo Drawing and Signature on other side
4. Old Logo & Wordmark on one side. Current logo on other side. 

Edit 1, 12/12/25: Added a Zubaz pattern. 

Please comment with any requests you have for certain patterns / logos / configurations and I will do my best to accommodate. 

Powered by MakerWorld-Christmas Ornament Maker (https://makerworld.com/makerlab/christmasOrnamentMaker)

Lastly.. Go Bills!