Christmas tree, Christmas stocking fridge magnet

Simple Christmas tree and Christmas stocking fridge magnet models, debugged and printed five or six times, are now ready for normal printing and use. Since I don't have many colors, I printed them all in one color. Each part is separate, and the plates are pre-arranged, allowing you to freely choose your favorite colors for printing. No supports, no AMS needed, and they can be printed and assembled within two hours.

The magnets are 5*2MM. Align them and press firmly or use an object to push them in; they should fit snugly. The small decorative balls on the tree might tip over during printing, causing spaghetti. If concerned, you can increase the skirt. My tests have been normal. The small balls fit quite tightly into the tree, requiring some force. If you want to adjust for different magnet sizes, you can download the BLEND file I uploaded and modify it directly using BLENDER. Please note that I directly booleaned the small balls with the tree, resulting in almost no gap between them, so my uploaded print profile scales the tree to 106% while other parts remain unchanged. This allows the small balls to fit tightly into the tree. Therefore, the hole size I set in BLENDER is 4.9*2MM; please be aware if you plan to modify it.

Hope you like my work. I'm new to modeling, so please let me know if there are any issues. I look forward to creating more refined and beautiful works in the future.