1:72 Red Alert 2 - Tesla tank / no AMS

The original design drawings of the Magnetron Tank were indeed very detailed, but the in-game model was simplified too much! Here, I had to restore it according to the original design drawings

I personally feel that the Magnetron Tank was designed from the beginning as a hypothetical enemy to the Prism Tank, but later in the game development process, not only was its in-game model simplified, its balance was also not adjusted much. This led to the Magnetron Tank being rarely used in actual gameplay, but its unique design concept was etched into players' minds instead

The Magnetron Tank has too many small parts, I racked my brains considering how to make assembly convenient. Especially for the Tesla coil, I revised its placement in such a small space several times

Assembly Suggestions:

1. Install the Tesla coils in the order shown in the figure (outer diameter from small to large, inner diameter from large to small). Each coil has a limit designed, do not force it in if the order is wrong to avoid damage!

The coils can be assembled without glue, if you are concerned, you can add a tiny bit of glue

2. Because the installation of rotating parts requires some force to work wonders, and the turret has many small parts

      --To prevent damage to small parts, it is strongly recommended to install the rotating parts first when assembling the turret.--

Below are the assembly exploded views: