Ratchet & Clank – Stylized Figur (AMS FanArt)
Print Profile(1)
Description
Description
Since the PS2 era, Ratchet & Clank have stood for crazy weapons, speed, and heart. Lombax mechanic Ratchet stumbles from planet to planet with his robot buddy, building galactic gadgets from scrap and saving the galaxy with a wink.
This FanArt perfectly captures that feeling: dynamic pose, oversized gadget, clear cartoon surfaces with enough relief for light & shadow. I created the figure in MakerWorld → MakerLab (2D→3D) and then optimized it for printing in Bambu Studio so that it comes out clean MULTICOLOR directly on FDM printers – single-color or multi-color.
Recommended Print Settings (Bambu, 0.4 mm) (already pre-configured in the 3MF file)
- Layer Height: 0.20 mm (optional for even finer details, print with 0.16 or 0.12mm!)
- Walls (perimeter): 3
- Top/Bottom: 6 / 6
- Infill: Gyroid 10%
- Seam: Back
- Detect thin walls: On
- Outer wall speed: 40–60 mm/s
- Material: PLA/PLA Matte
Supports (organic/"tree"): On, 30° threshold angle
Orientation & Size
- Upright as in the photo; slight diagonal reduces the Z-seam.
Note & License
I am sharing my 3MF/STL here as FanArt. No official content; only private, non-commercial use. All brands/characters belong to Sony/Insomniac.
Boost Me (for free)
your boosts help me realize more beautiful projects :-)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)