Print Profile(1)
Description
Project: messi 2.0.hfp
Print with 100% infill with a layer height of 0.08 mm and a 0.16 mm base layer.
The model measures 104.52 x 200 mm. You can print with higher layer heights, below the base thickness of 0.48 mm. The maximum allowed thickness is 2.24 mm and the actual thickness is 2.24 mm.
Filaments used:
Bambu Lab:
Dark Blue Basic
Black Matte Basic
White Matte Basic
Gray Basic
Gold Silk
Swap instructions:
Start with black. At layer #9 (0.8 mm)
Change to Bluish Gray At layer 13 (1.12 mm)
Change to Gray At layer 15 (1.28 mm)
Change to Jade White At layer 19 (1.6 mm)
Change to Intense Gold for the rest.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)